1MORE Triple Driver In‑Ear Earphones (Silver) Review: Audiophile Sound on a Budget-Friendly Wire

Overview

The 1MORE Triple Driver in‑Ear Earphones (Silver) are wired, hi‑resolution headphones aimed at listeners who care more about sound quality than the latest wireless features. With two balanced armature drivers and one dynamic driver per side, plus THX certification and tuning by Grammy‑winning engineer Luca Bignardi, they target a sweet spot between mainstream earbuds and enthusiast‑grade in‑ear monitors.

Despite being an older, well‑established model, the Triple Driver still stands out in 2026 as a value‑oriented audiophile pick. On the Amazon product page, they typically sit around $69.99, which puts them in competition with many midrange wireless earbuds yet with performance that often exceeds them for pure sound quality.

These earphones are compatible with smartphones, PCs, and tablets via a standard 3.5 mm plug (you’ll need a dongle if your device lacks a headphone jack). They include a MEMS microphone and an in‑line remote so they can double as everyday communication headsets in addition to music listening.

Standout Features

Triple‑driver hybrid acoustic design

The core of the product is its three‑driver setup:

1 dynamic driver for low frequencies (bass)
2 balanced armature drivers for mids and highs

This arrangement allows each driver to focus on a narrower part of the spectrum. In practice, that usually means tighter bass, clearer vocals, and more detailed treble than you’d get from a typical single‑dynamic earbud at a similar price.

THX certification

A key distinction of the 1MORE Triple Driver is that it was among the first in‑ear headphones to earn THX certification. That certification emphasizes:

Controlled, consistent frequency response
Low distortion across the audible band
Good channel matching and isolation

You’re not just getting a “fun” tuning; you’re getting a sound profile that’s been vetted for accuracy and technical performance, something sound enthusiasts often look for.

Hi‑Res Audio support

The Triple Driver supports a 20–40,000 Hz frequency range, earning it a Hi‑Res Audio badge when paired with capable sources. While frequencies above 20 kHz are beyond human hearing, the extended range can correlate with cleaner reproduction in the audible band and compatibility with high‑resolution audio formats.

MEMS microphone and in‑line remote

Built into the cable is a MEMS microphone positioned below the jawline, alongside a three‑button in‑line remote. This supports:

Play / pause and track skipping
Volume up / down
Answering and ending calls

The remote is designed to work with both major mobile platforms, making the Triple Driver a practical choice for people who alternate between smartphones and laptops.

Premium materials and accessories

1MORE leans into a more premium presentation than most wired earbuds in this bracket:

Aluminum alloy housings with angled nozzles for an ergonomic fit
Braided fabric outer cable from the plug to the Y‑splitter for improved durability
A generous set of silicone and foam ear tips in multiple sizes
A carrying case or pouch for storage and travel

This combination of materials and accessories makes the Triple Driver feel like a step up from basic budget wired earbuds.

Supporting Features

Beyond its headlining specs, several supporting features round out the package:

Standard 3.5 mm plug – Works directly with devices that still include a headphone jack and via dongles or USB‑C/Lightning adapters on newer phones and laptops.
Low impedance (around 32 Ω) – Easy to drive from phones, tablets, and laptops without needing a separate headphone amplifier.
Lightweight build (approx. 18 g) – Reduces fatigue for long listening sessions.
Long, tangle‑resistant cable (about 1.25 m) – Enough length for desktop and mobile use, with partial fabric sheathing to improve durability.
Included ear‑tip variety – Multiple silicone and foam tips make it easier to get a good seal, which is essential for both bass response and passive isolation.

These details reinforce the product’s daily usability and help it serve as a single, do‑it‑all wired option for commuting, office work, and home listening.

Usability

Comfort and fit

The earphones use an angled in‑ear design intended to follow the natural contour of the ear canal. Combined with their light weight, many users find they can wear the Triple Driver for extended periods with minimal discomfort.

Getting the right fit, however, depends heavily on choosing the correct ear‑tip size and material. The included silicone tips offer a slightly more open, airy feel, while the foam tips can improve seal and isolation but may wear out faster over time.

Everyday handling

The partially braided cable feels sturdy, but the upper rubber sections can still tangle and snag on clothing. This isn’t unusual for in‑ear headphones, but it’s worth noting if you’re used to completely flat or fully braided cables.

The in‑line remote is simple and tactile, with three distinct buttons that are easy to find by feel. It’s positioned so it’s reachable without pulling on the earphones, and the MEMS microphone’s location near the jawline helps capture your voice clearly in calls.

Compatibility

Because they are wired with a 3.5 mm connection, the Triple Driver works with:

Older and midrange Android phones that still have headphone jacks
PCs and laptops with a combined audio jack
Tablets with 3.5 mm ports
Newer phones and tablets via USB‑C or Lightning audio adapters

If you already rely on a USB‑C or Lightning dongle for other wired headphones, the Triple Driver will fit into your existing setup without issue.

Performance

Sound signature

The 1MORE Triple Driver is tuned with a mildly V‑shaped but generally balanced profile:

Bass: Full and punchy, with more control and texture than many single‑driver earbuds at this tier. It’s not a basshead cannon, but it has enough low‑end energy for modern pop, hip‑hop, and electronic music without overwhelming the mids.
Mids: Vocals and instruments are clear and present, with good separation. Male and female voices both come through with natural timbre, which is a strong point for these earphones.
Treble: Extended and detailed, providing good sense of air and sparkle. Some highly treble‑sensitive listeners may find certain recordings a touch bright, but overall the treble is well‑controlled and contributes to the Triple Driver’s reputation for high detail retrieval.

For this price class, the level of resolution, layering, and instrument separation is impressive, especially when fed with higher‑quality sources.

Soundstage and imaging

In‑ear monitors typically don’t have the same wide soundstage as over‑ear headphones, but the Triple Driver does a respectable job:

The stage feels moderately wide for an IEM, with some sense of depth.
Imaging is precise enough to locate instruments and vocals in busy tracks.

This makes them suitable not only for casual listening but also for critical listening, light mixing reference, or enjoying live and orchestral recordings.

Call quality and media use

The MEMS microphone captures speech clearly for video calls, phone calls, and online meetings. In noisy environments, background sounds can still leak through, but compared with in‑line mics on cheaper earbuds, intelligibility is noticeably better.

Latency is naturally minimal since these are wired, making them ideal for:

Watching videos without lip‑sync issues
Casual and competitive gaming, where audio delay can be distracting

Noise isolation

The Triple Driver provides passive isolation only (no active noise cancelling). With a good tip seal, it can effectively reduce low‑level ambient noise like office hums or home appliances. However, it won’t block out loud engines or subway noise as much as true ANC headphones.

If your primary goal is maximum isolation, you may need deeper‑fitting tips or to consider ANC alternatives. But for general commuting and office use, the isolation should be adequate for most users.

Pros and Cons

Pros

Excellent sound quality for the money, with clear, detailed, and engaging tuning
Triple‑driver hybrid design offers strong technical performance and separation
THX certification underscores low distortion and accurate frequency response
Hi‑Res Audio capable with extended frequency range (up to around 40 kHz)
Comfortable, lightweight fit with angled nozzles and multiple ear‑tip options
MEMS microphone and 3‑button in‑line remote for calls and media control
Premium construction using aluminum alloy housings and partially braided cable
Generous accessories, including case/pouch and multiple silicone/foam tips
Easy to drive from smartphones, laptops, and tablets without extra amplification

Cons

Wired only – no Bluetooth or active noise cancelling
Upper cable section can tangle and snag, especially the rubberized parts
Isolation is moderate rather than extreme, given the shallow‑to‑medium insertion
In‑line remote housing feels less premium than the metal earpieces
Requires a dongle or adapter for devices without a 3.5 mm headphone jack

Summary

The 1MORE Triple Driver in‑Ear Earphones (Silver) remain one of the strongest arguments for wired audio in a market dominated by wireless buds. Their triple‑driver configuration, THX certification, and careful tuning result in sound quality that rivals—or surpasses—many products at and above their class, especially when you factor in the usual selling price around $69.99.

They are not for everyone: if you want complete freedom from cables, active noise cancelling, or a fully waterproof design, you’ll need to look elsewhere. But if your priorities are clarity, musicality, and long‑term listening comfort, and you’re comfortable living with a 3.5 mm plug and occasional cable tangles, the 1MORE Triple Driver offers exceptional value.

For listeners using smartphones (with or without a dongle), PCs, or tablets, these earphones are a compelling recommendation as a primary wired pair that can handle both serious music listening and everyday calls without breaking the bank.